AxZir full-contour zirconia offers dental technicians an efficient and reliable method for producing aesthetic zirconia restorations.
Our system consists of two varieties of pre-shaded and multilayer zirconia along with three choices for solid discs in a wide variety of sizes, shades, staining liquids and transparency levels.
Utilizing our pre-shaded discs, dental professionals can simply and consistently produce all 16 Vita A-D shades as well as bleach shades. No dipping or use of coloring liquids is required at any point in the process, helping to ensure a consistent aesthetic result.
Three different materials are available:
Multi-layered and pre-colored discs are also available. Colored zirconia blocks are available in LL1, LL2, LL3, LL4, LL5. Or A1-D4 vita 16 classical shades
Combines unparalleled translucency and exceptional flexural strength.
All 16 VITA® shades can be achieved by pairing with AxZir Shading Liquids prior to sintering.
Details in Store
Match all the VITA® Classical shades without having to add any steps in your production process- shading liquids or staining is not required.
Natural looking translucent alternative to glass-ceramics without sacrificing strength or durability.
Details in Store
Multi-Layered Zirconia with more indications and strength than Lithium Disilicate
Gradient shading that matches the Incisal, Dentin and Gingiva. Suitable for anterior restorations with transition of layers, mimicking the translucency and aesthetics of a natural tooth.
Details in Store
Adjustment and Polishing burs to adjust, polish or remove AxZir and other zirconia materials eliminate marks without modifying the crystalline structure.
Combine white discs with the AxZir coloring liquids to achieve all 16 VITA classical A1-D4® shades & enhance with up to 8 unique modifier liquids to achieve superior aesthetics.
Details in Store
AxZirxt multilayer zirconia provides natural gradients of color, translucency and strength producing restorations of unmatched aesthetics and strength representing true innovation in dental material and revolutionizing dentistry once again.
6-layer natural color transition, matching the natural color gradient of the tooth from cervical to incisal.
Translucency from 57% incisal to 43% cervical represents the natural gradient decrease achieving life-like transparency; high transparency of tooth enamel to effective opaque, lower transparency in cervical area.
Strength gradient from 600 Mpa to greater than 900 Mpa achieves lower strength in occlusion, causing no harm to opposing dentin. High strength in base support long bridge applications.
AxZirxt Multilayer Zirconia discs are available in VITA classical A1-D4® shades.
Suprême Lithium disilicate glass-ceramic is ideally suited for the fabrication of anterior and posterior monolithic restorations or veneered restorations. Excellent aesthetics are achieved due to its natural-looking tooth coloring and excellent optical properties while it's outstanding performance is based on a combination of excellent flexural strength and high fracture toughness allowing the clinician to work in accordance to the requirements of conservative dentistry. The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology.
This material can be utilized for high-efficiency aesthetic restorations such as: veneers, inlays, onlays, partial crowns, anterior crowns, posterior crowns etc.
Suprême glass-ceramic products are used in conjunction with either press or CAD/CAM technology and are part of an Open-system, allowing you to choose any combination of our products to create a digital dental solution to meet your budget and fulfill your needs.
This form of ceramic block is utilized in a CAD/CAM system in a crystalline state (with a lilac color appearance) which is manufactured on a CNC milling machine utilizing a grinding technique.
After milling is completed, a porcelain furnace is used to crystallize the material at a temperature of 840-850°C yielding a restoration with a bi-axial flexural strength between 400Mpa ± 60Mpa.
Suprême UP-CAD blocks have been divided into two categories according to their respective translucency characteristics:
Suprême.press is a form of lithium disilicate glass- ceramic block which is suited for the pressing technique. Suprême.press ingots are available in two translucency levels.
Suprême.press HT ingots are supplied in 6 A–C Vita and 2 bleach shades. Due to their high translucency – similar to that of natural enamel – these ingots are suitable for producing small restorations (e.g. inlays). The restorations are customized utilizing the staining technique.
Suprême.press LT ingots are supplied in 7 A–C Vita and 2 bleach shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The esthetic appearance of the restorations is maximized by the cut-back technique.
POLIDENT PMMA CAD-CAM DISCS are suitable for the fabrication of temporary crowns and bridges and for verifying the restoration on the plaster model / in mouth before the final milling process.
PMMA-poly methyl methacrylate is primarily designed for production of long or short term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
These high-quality PMMA discs are biocompatible for patients with allergies and have the highest density possible because there are no inorganic fillers or fiber.
Suitable for the fabrication of temporary crowns & bridges and for verifying restorations on models.
VITA® shades A1, A2, A3, B1, B2, B3, BL1, BL2 BL3, Clear, enamel colors E1, E2
Benefits: Strength & stability, high luster polishability, excellent machinability, absolutio bio-compatibility & stainable.
Details in Store
Ideal for obtaining a perfect color effect of temporary crowns and bridges in a single step.
Benefits: Strength and Stability, High Luster Polish-ability, Excellent Machinability, Absolute Bio-compatibility.
Available in heights of 15mm, 18mm, 20, & 25mm.
Details in Store
Primarily designed for production of long or short term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
Benefits: Strength and stability, high Luster polishability, excellent machinability, absolute bio-compatibility and stainable
Details in Store
Available in two densities A higher density (beige) is easily machinable and has an extremely high quality surface finish.
A lower density (brown) is recommended for bigger models and antagonist models.
The material closed cell structure doesn’t absorb water and is recommended for ceramic layering.
Details in Store
Discs Can be used for immediate load implant denture as a long term provisional in combination with denture teeth and titanium connectors.
Artificial teeth are attached on denture base with PMMA resin or light curing composite material with proper primer.
Available in thicknesses of 25, 27 and 30mm .
Details in Store
Contains X- ray visible powder.
Homogeneous mix ensures best visibility.
Prevents light scattering.
Indications: allows visibility of teeth setup in the x-ray CAT scan for implant planning and determination.
Details in Store
Indications: milling frameworks for casting
Milling castable layers for press ceramic
Verifying frameworks on plaster model/ in mouth before final ZrO2 milling.
Shades: transparent in thickness range of: 10 – 25 mm.
Details in Store
Used for immediate load implant denture as a long term provisional in combination with denture teeth and titanium connectors.
Teeth can be milled directly or used in conjunction with artificial teeth which are attached on denture base with PMMA resin or light curing composite material with proper primer.
Details in Store
Since 1958 Polident have been offering top quality dental products to help you offer your clients the best possible treatment and aesthetic solutions. For their 55th anniversary, we present the new line of anatomical teeth REF-LINE for the most demanding users.
PMMA-poly methyl methacrylate is primarily designed for production of long or short term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
These high-quality PMMA discs are biocompatible for patients with allergies and have the highest density possible because there are no inorganic fillers or fiber.
The following optional accessories are available:
Ref-line teeth are made from a new composite acrylic material. The material is composed
of pre-cross-linked polymer and the matrix reinforced by inorganic nano- and micro-fillers.
Compared to conventional acrylic, the new Ref-line material offers improved resistance to
the mechanical wear, good resistance to plaque adhesion, color stability, higher hardness,
excellent polishing properties and good adhesion to denture base materials.
Anatomically designed pronounced cusps assure the maintaining of the natural tooth appearance and structure in individual matching with the antagonists anatomically designed pronounced cusps assure the maintaining of the natural tooth appearance and structure in individual matching with the antagonists.Brand new production technology has provided perfection of tooth design. For example the retention opening on the lower part of the trans canine teeth provides for easier and faster work.
New material advancements provide a 50% improvement in tooth wear and 15% improved hardness without affecting elasticity.
look and Feel Natural
Three-layered polymethylmethacrylate PRIMODENT teeth are artificial teeth that come in a wide range of forms, sizes and shades, and are suitable for the production of top-quality partial and total dentures.
To produce PRIMODENT teeth Polident uses top-quality materials and appropriate technological processes that assure the color and heat stability of the teeth, strong resistance to abrasion and solvents and durable adhesion with denture base material.
To assure constant quality and the proper shade, PRIMODENT teeth undergo three different visual inspections as well as other standard tests and analyses
PRIMODENT teeth are available in 16 shades, harmonized with the VITAPAN® CLASSIC shade guide and 19 shades harmonized with the CHROMASCOP® shade guide.
You can order PRIMODENT teeth either as a complete set of 28 teeth for total denture or as a separate set of 6 or 8 teeth (A6 upper anterior, A6 lower anterior, A8 lower posterior, A8 upper posterior).
To identify the optimal aesthetic and functional solution for your customer we have prepared a list of suggested combinations of different anterior and posterior sets. You can find it in our PRIMODENT leaflet.
PRIMODENT "V" |
BL3 |
A1 - A2 - A3 - A3.5 - A4 |
B1 - B2 - B3 - B4 |
C1 - C2 - C3 - C4 |
D2 - D3 - D4 |
PRIMODENT |
Y0 - Y1 - Y2 - Y3 - Y4 - Y5 - Y6 |
B1 - B2 - B3 - B4 - B5 - B6 |
G1 - G2 - G3 - G4 - G5 - G6 |
For a Beautiful Smile
The two-layered CROSS LINKED 2 teeth are highly cross linked polymethylmethacrylate teeth. The top-quality base material and suitable technological processes assure the color and heat stability of the teeth, strong resistance to abrasion and solvents and durable adhesion with denture base material.
CROSS LINKED 2 teeth are successfully integrated into partial and total dentures as they replace the patient's teeth in terms of appropriate aesthetics and functionality.
CROSS LINKED 2 teeth are available in 12 shades, harmonized with the VITAPAN® CLASSIC shade guide.
You can order CROSS LINKED 2 teeth either as a complete set of 28 teeth for total denture or as a separate set of 6 or 8 teeth (A6 upper anterior, A6 lower anterior, A8 lower posterior, A8 upper posterior).
To identify the optimal aesthetic and functional solution for your customer we have prepared a list of suggested combinations of different anterior and posterior sets. You can find it in our CROSS LINKED 2 leaflet.
CROSS LINKED 2 |
BL3 |
A1 - A2 - A3 - A3.5 - A4 |
B1 - B2 - B3 - B4 |
C1 - C2 - C3 - C4 |
D2 - D3 - D4 |
For a Beautiful Smile