Custom Implant Abutment Solution
With the Axsys Dental Solutions Custom Abutment Manufacturing System you can stop out-sourcing your implant abutment business and increase your profits by as much as 300%.
Couple the accuracy and rigidity of our VersaMILL Precision Dental Machining Centers with the highly-efficient and comprehensive machining templates developed by our expert team of Application Engineers to quickly produce custom abutments from NT-Trading FDA registered blanks and our 6-Unit abutment fixture; the quality of which will astonish patients and customers alike.
Single-unit Pre-form Abutment Blanks
NT-Trading, NT-Preform® single-unit pre-milled abutment blanks are ideal for fabricating hybrid abutments and screw-retained crowns and can also be used in bridge frameworks.
NT-Preform abutment blanks are made of high quality Grade 5 titanium and are available for the most popular implant systems. System components include; groove indexed lab analog's, milling screws, abutment screws and abutment fixture grips for use in our versatile 6-position abutment fixture.
Additional system features include:
- Complete customized abutment libraries.
- Compatible with the most popular CAD/CAM systems.
- Robust machining templates.
- Precision 6-unit fixture.
Custom, Precision Multi-Unit Fixture
The latest version of our NT-Abutment cartridge for the VersaMILL 5X-200 introduces many advantages and improvements over the standard product provided by NT-Trading.
Our abutment manufacturing system utilizes the same base fixture utilized for zirconia cartridges. This time and money saving approach, coupled with the ability to easily swap between the VersaMILL’s dual coolant tanks makes transitioning between machining titanium abutment blanks and zirconia easier than ever.
The abutment cartridge mounts directly into the standard VersaMILL 5X-200 fixture so there is no need for technicians to go through a complicated and lengthy calibration routine.
Custom fixture features include:
- Highly accurate one piece design eliminates stack tolerance errors
- Cartridge is finished machined directly on each mill ensuring positional accuracy without complicated setup.
- Fully compatible with NT-Trading abutment inserts, analogs, and blanks.
- Alignment pins ensure repeatable accuracy.
- Sub-30 Micron repeatability possible.
- Blank is fully supported by both the analog and tailstock greatly improving rigidity and surface finish.
- Tailstock is designed so that any rotational forces induced during milling are NOT applied directly to the interface.
- Modular design allows labs and milling centers to mix and match different size abutments and platforms in a single setup.
Superior Abutment Manufacturing Capability
Automated Machining of Even the Most Severe Abutment Designs.
Machining Templates
Over 40 years of digital design and manufacturing experience enables us to provide the most comprehensive custom abutment machining solution handling the widest variety of design features and abutment characteristics.
Couple Axsys expertise with the quality and precision of Versamill machine technology to produce restoration of superior quality:
- Finest of restorative margins.
- Most esthetic emergence profiles.
- Perfect fits.
- Smoothest subgingival surface finishes (under 1µm).
- Completeness of final machined product.
- Minimum post-machining hand-work.
Enhanced Abutment Libraries
Our team of expert Dental, CAD/CAM and manufacturing experts have leveraged our 40 years of experience to provide significant enhancements to the standard deliverable abutment design and machining libraries. These modifications include enhancements to the user interface, milling strategies, CAD libraries and more and greatly improve robustness, restoration quality, tool life, surface finish, machine time and reliability.
Our enhanced CAD libraries virtually eliminates hand-finishing and provides significantly more flexibility in abutment design.
EXAMPLES OF OUR ENHANCEMENTS
Robust Milling Templates to Process Even the Most Complex Cases
Complex Design: Case 1
- Extreme Subgingival Radius.
- Near Vertical Supragingival
"Flange". - Occlusal Undercut.
Complex Design: Case 2
Small subgingival concave radius requires special tooling and consideration of machining conditions.
Complex Design: Case 3
- Large Divergence Angle.
- Extreme Depth Requires Special
Rough & Finish Machining
Considerations. - Supragingival Machining
Challenge.
Complex Design: Case 4
- Subgingival Undercuts.
- Large "Clocking" Channel.
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
Highly Divergent Custom Abutment
& Smooth Blend to Post.
Highly Divergent Custom Abutment
Fine Transgingival Surface Finish
& Smooth Blend to Post.
Highly Divergent Custom Abutment
User-defined Cementation Grooves & Smooth
Blend to Post.
Highly Divergent Custom Abutment
& Smooth, Tangential Blend to Interface.
Highly Divergent Custom Abutment
& Smooth Blend to Interface.
Highly Divergent Custom Abutment
User-defined Cementation Grooves & Smooth
Blend to Post.
Highly Divergent Custom Abutment
User-defined Cementation Grooves & Smooth
Blend to Post.
Highly Divergent Custom Abutment
& Fine Transgingival Surface Finish.
Highly Divergent Custom Abutment
Laser interferometer showing 0.9µm Ra
Transgingival Surface Finish.
Ra is the arithmetic average deviation of the
surface valleys and peaks and is used to
specify the roughness of a machined surface.
NT-Preform Blank on the Versamill 5X200
Precision Dental Machining Center.
Providing support for over 80 implant systems with more than 500 connections
with repeatable precision and superior engagement
Review the products.
ARUM-PREFORM®
Milling blank for individual one-piece titanium abutments used in the CAM process.
HIGHLIGHTS
Precision prefabricated implant interface.
Available in 10.0mm and 14.0mm diameters.
High precision with 5 micron tolerances.
Highly esthetic emergence profiles
Includes both millling and clinical screws
CERTIFICATIONS
Approved by FDA, CE, ISO 9001, ISO 13485
APPLICATIONS
Primary telescopes on implants.
Mesio-structures for crowns and bridges.
Occlusal screwable structures.
TECHNICAL INFORMATION
Ti 6AI-4V ELI (ASTM F 136)
TITANIUM BASE
ARUM presents a complete line of Ti-bases designed to provide security and adjustment, without increasing the cost of the prosthesis.
Additional savings are realized as less time is requiured to work on the most sensitive part of the prosthesis—the adjustment with the implant.
Designed specifically to ensure a stable union, reinforcing the structure of zirconium in the areas of greatest stress, softened edges and extended service life of the prosthesis.
FEATURES
Titanium interface abutment
2 Screws included (Angled screw / Straight screw)
Precision machined up to ± 5µm
Superior level of biocompatibility
Exterior retentions for more cementation bonding
APPLICATION
For individual glued ceramic abutments (zirconia lithium disilicate) or synthetics (PMMA, PEEK, composite)
TECHNICAL INFORMATION®
Ti 6AI-4V ELI (Grade 5)
Approved by FDA, CE, ISO 9001, ISO 13485
ARUM® MULTI-UNIT
ARUM presents a complete line of Ti-bases designed to provide security and adjustment, without increasing the cost of the prosthesis.
Furthermore, the saving is also shown in the less time needed when working on the most sensitive part of the prosthesis, the adjustment with the implant.
Specific design ensures a stable union, reinforcing the structure of zirconium in the areas of greatest stress, softening edges and ensuring the service life of the prosthesis.
FEATURES
Self – centering conical connection.
Maximum flexibility of divergent implant positions.
2 Screws included (Angled screw / Straight screw)
Precision machined up to ± 5µm
Superior level of biocompatibility
Exterior retentions for more cementation bonding
APPLICATION
Bars.
Bridges.
Non-engaging structures.
TECHNICAL INFORMATION®
Ti 6AI-4V ELI (ASTM F 136)
MODEL SCAN BODIES
ARUM scanbodies represent the position and orientation of the respective dental implant or analog in the CAD/CAM scanning process. This helps the CAD/CAM software to correctly align the subsequent CAD/CAM restorations.
ARUM scanbody ensures that it is optimised for a wide range of optical scanners.
FEATURES
High accuracy
Free remote library setup
More than 500 implant connections
Different shape geometry ensures a perfect transfer in CAD software in case of incomplete scanning detection.
APPLICATION
Scanbody for model scanning.
TECHNICAL INFORMATION®
Stainless Steel 303F
INTRAORAL SCAN BODIES
The Arum intraoral scanbody is specifically designed with an internal spinal thread, which prevents detachment and loss of screw once it is tightened and fully engaged to the implant fixture
The lower body of the intra-oral scanbody is concave shaped. This minimizes pressure on the patient’s gum during setting of the scanbody, thereby reducing experienced pain and securing a broader gingival area for future implant placement.
The holder allows the dentist to quickly and easily set the intra-oral scanbody into the implant fixture. This is especially effective for challenging cases such as the most distal molar.
The “A” Line of the ARUM intra-oral scanbody provides an indicator to the operator to check for a complete connection to the implant fixture and thereby ensuring a more precise prosthesis.
FEATURES
Fixture Connection Indicator on scanbody - A-line
Inner Thread for Screw Holding
Concave Neck Design
Autoclavable
Scanbody Holder included
APPLICATION
Scanbody for model scanning.
TECHNICAL INFORMATION®
Ti 6AI-4V ELI (ASTM F 136)
LAB ANALOG
Digital Implant Model-Analog available for 24 implant systems.
FEATURES
Implant analog for digital model manufacturing..
Anti-rotational design.
Precision machined up to ± 5μ
Positional adjustment possible.
Analog design supports precise repositioning of removable gingiva mask.
APPLICATION
For 3D print & stone model
TECHNICAL INFORMATION®
Stainless Steel 303F
TORQUE WRENCHES
Excellent Support
Development dolor sit amet, consectetur adipiscing elit. Phasellus ac fringilla nulla, sit amet consequat eros. Pellentesque pharetra blandit commyolk. Phasellus massa nisl, feugiat ac bibendum et, dictum id ipsum. Quisque sit amet accumsan tortor It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged many web sites.
Nullam turpis. Cras dapibus, orci rutrum adipiscing luctus, nisl magna tempus urna, id porttitor nunc arcu et mauris. Suspendisse id justo id nisi suscipit porttitor. Pellentesque aliquet, leo id vestibulum eleifend, magna sem iaculis risus, quis volutpat turpis quam in tortor. Morbi euismod nulla aliquet felis. Sed nisi neque, fermentum sit amet, vestibulum et, pretium sit amet, tortor. Nulla egestas pede. Phasellus ac enim. Vivamus risus. Aliquam lacinia ante quis nibh. Curabitur velit. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas.
NT-Trading
High-quality FDA Cleared Products
for Implant Supported Restorations
Review the products.
NT-PREFORM®
Milling blank for individual one-piece titanium abutments used in the CAM process.
BENEFITS
Precise prefabricated implant interface.
Available in two different gingiva heights.
Individual abutment design by prosthetical terms.
Optimal interface protection by bilateral fixing in preform holder during the milling process.
APPLICATION®
Primary telescopes on implants.
Mesio-structures for crowns and bridges.
Occlusal screwable structures.
TECHNICAL INFORMATION®
Titanium Grade 5 ELI
TITANIUM BASE
For implant supported individual hybrid abutments.
BENEFITS
Engaged unit.
For individual abutment designs.
Large glue surface providing durable solid connection to the base.
For conventional use as well as for use in the CAD/CAM process.
APPLICATION
For individual glued ceramic abutments (zirconia lithium disilicate) or synthetics (PMMA, PEEK, composite)
TECHNICAL INFORMATION®
Titanium Grade 5 ELI
2-CONNECT®
Angle compensation for divergent implants available in different gingiva heights and angled version
BENEFITS
Self – centering conical connection.
Maximum flexibility of divergent implant positions.
Stressless fitting by optional adhesive connection (female part).
Female part compatible between the different implant systems and diameters.
Force application caused by tube shape and integrated screw (Straight Abutment) or mounted screw (Angled Abutment).
APPLICATION
Bars.
Bridges.
Non-engaging structures.
TECHNICAL INFORMATION®
Titanium Grade 5 ELI
3D GUIDE®
Scanbody for high-precision implant position transfer.
BENEFITS
Exact positioning by metal interface.
Conceived for intra-oral scanners.
Screw integrated.
X-ray detectable.
Rotatable to facilitate interproximal crowding.
Different shape geometry ensures a perfect transfer in CAD software in case of incomplete scanning detection.
APPLICATION
Scanbody for model scanning.
Scanbody for inter-oral scanning.
Non-engaging structures.
TECHNICAL INFORMATION®
Tolerance 2-3µm
DIM-ANALOG
Digital Implant Model-Analog available for 24 implant systems.
BENEFITS
Implant analog for digital model manufacturing in the model builder library.
Two-piece repositionable implant analog.
Precise positioning.
Positional adjustment possible.
Analog design supports precise repositioning of removable gingiva mask.
APPLICATION
For model manufacturing in digital workflow.
Scanbody for inter-oral scanning.
Non-engaging structures.
TECHNICAL INFORMATION®
Stainless steel
Titanium Grade 5 ELI.
PROSTHETIC TOOLS
Improvements in all areas of implant technology.
The nt-trading company focuses on the development and the production of premium products in the field of dental implant technology. More and more customers all over the world benefit from our high standards in quality, precision and innovation. With our products we improve prosthetic production processes and optimize the prosthetic treatment possibilities.
Starter Packages
We've put together some money saving starter packages containing the key components of our abutment machining solution.
All components are compatible with the NT-Trading fixture for the VersaMILL and other supported milling machines and designed to provide you with all that is necessary to get you up and running as quickly and easily as possible.
Components include:
- Custom Versamill precision abutment fixture.
- Abutment grip inserts.
- Required tools and holding screws.
- Custom machining templates for all supported implant systems.
- NT-Preforms with (1) Lab Analog per interface.
- Titanium Tooling Package
1. Package does NOT include Abutment Grip Inserts.
2. Fixture Insert Finish Machined on Your VersaMILL.
3. Inspected and Assembled for Complete Accuracy
and Repeatability.
Package Contents
 |
6-Unit Fixture w/Calibration Unit & Cartridge Blank. |
 |
Rough-machined Versamill Cartridge Blank w/Finishing Fixture Toolpath, Inspection & Assembly. |
 |
Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills. |
1. Fixture Insert Finish Machined on Your VersaMILL.
2. Inspected and Assembled for Complete Accuracy
and Repeatability.
Package Contents
|
6-Unit Fixture w/Calibration Unit & Cartridge Blank. |
|
Rough-machined Versamill Cartridge Blank w/Finishing Fixture Toolpath, Inspection & Assembly. |
| |
Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills. |
 |
(1) Each Abutment Grip Inserts: 3.5mm, 4.3mm or 5.0mm. |
 |
Screw & Wrench Set. Includes: (9) Analog Holding Screws, (4) Fixture Grip Holding Screws, Hex Wrench Set & Fixture Grip Wrench. |
 |
Lab Analog (Nobel Replace Select® Compatible). |
 |
Axsys Dental Solutions Expert Abutment Machining Templates. |
 |
NT-Preform w/ Milling Screw (4.3mm Nobel Replace Select® Compatible). |
1. Fixture Insert Finish Machined on Your VersaMILL.
2. Inspected and Assembled for Complete Accuracy
and Repeatability.
Package Contents
|
6-Unit Fixture w/Calibration Unit & Cartridge Blank. |
| |
Rough-machined Versamill Cartridge Blank w/Finishing Fixture Toolpath, Inspection & Assembly. |
|
Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills. |
|
(2) Each Abutment Grip Inserts: 3.5mm, 4.3mm or 5.0mm. |
| |
Screw & Wrench Set. Includes: (18) Analog Holding Screws, (4) Fixture Grip Holding Screws, Hex Wrench Set & Fixture Grip Wrench. |
|
(1) Each All Supported Lab Analogs. |
|
Axsys Dental Solutions Expert Abutment Machining Templates. |
| |
(1) Each All Supported NT-Preform w/ Milling Screw. |
Insert Grip 3.5mm
| SYSTEM | ASSOCIATED LAB ANALOG |
| Replace Select® | Lab Analog 3.5mm NP |
| SynOcta® | Lab Analog 3.5mm NN |
| Bone Level® | Lab Analog 3.3mm NC |
| Astra® | Lab Analog 3.5mm/4.0mm |
| Zimmer® | Lab Analog 3.5mm |
| 3i Certain® | Lab Analog 3.4mm |
| Nobel Active® | Lab Analog 3.5mm NP |
Insert Grip 4.3mm
| SYSTEM | ASSOCIATED LAB ANALOG |
| Replace Select® | Lab Analog 4.3mm RP |
| SynOcta® | Lab Analog 4.8mm RN |
| Bone Level® | Lab Analog 4.1mm/4.8mm |
| Astra® | Lab Analog 4.5mm/5.0mm |
| Zimmer® | Lab Analog 4.5mm |
| 3i Certain® | Lab Analog 4.1mm |
| Nobel Active® | Lab Analog 4.3/5.0mm RP |
Insert Grip 5.0mm
| SYSTEM | ASSOCIATED LAB ANALOG |
| Replace Select® | Lab Analog 5.0mm WP |
| SynOcta® | Lab Analog 6.5mm WN |
| Zimmer® | Lab Analog 5.7mm |
| 3i Certain® | Lab Analog 5.0mm |
Excellent Support
Development dolor sit amet, consectetur adipiscing elit. Phasellus ac fringilla nulla, sit amet consequat eros. Pellentesque pharetra blandit commyolk. Phasellus massa nisl, feugiat ac bibendum et, dictum id ipsum. Quisque sit amet accumsan tortor It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged many web sites.
Nullam turpis. Cras dapibus, orci rutrum adipiscing luctus, nisl magna tempus urna, id porttitor nunc arcu et mauris. Suspendisse id justo id nisi suscipit porttitor. Pellentesque aliquet, leo id vestibulum eleifend, magna sem iaculis risus, quis volutpat turpis quam in tortor. Morbi euismod nulla aliquet felis. Sed nisi neque, fermentum sit amet, vestibulum et, pretium sit amet, tortor. Nulla egestas pede. Phasellus ac enim. Vivamus risus. Aliquam lacinia ante quis nibh. Curabitur velit. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas.
- Address: 29627 West Tech Dr.
Wixom, MI 48393 - Toll Free: + 1 (855) 687 7941
- Office: + 1 (248) 926 8810
- Fax: + 1 (248) 926 9085
- Email: info@axsysinc.com
Recent Posts
Axsys Dental Solutions Annouce TrimExpert
The First Ever Automated Applicance Trimming Solution
New Versamill 5X450 Announced
Axsys Dental Solutions Announces The Immediate Release Of the New Versamill 5X450useful links
- Whitepaper: Construction Characteristics of an Effective Dental Milling Machine
- 10 Questions to Ask Before Purchasing a New Dental Milling Machine
- Axsys Dental Solutions Personal Care Support Program
- Axsys Dental Solutions Corporate Datasheet
- ROI Calculator: Restorative
- ROI Calculator: Custom Abutments