translucent zirconia CAD/CAM discs.
Axsys offers an assortment of dental materials in a range of sizes and configurations for the manufacturing of dental restorations. Whether it be PMMA, zirconia, stainless steel, or titanium, we can provide high-quality, blank CAD/CAM discs in a size and configuration to meet the needs of dental practices, labs, and milling centers, regardless of their CAD/CAM software system or CNC dental milling machine manufacturer.
Dental Direkt, as a full-service provider in the dental industry, has established itself as a reliable partner for laboratories and dentists for over 25 years. Whether in the analog or digital dental world, whether in the areas of CAD/CAM, esthetics, or prosthetic components, Dental Direkt is an expert in materials and a provider of innovative digital solutions. As Europe’s largest manufacturer of zirconia, Dental Direkt sets standards in the industry and offers comprehensive services to meet the needs of dentists and dental technicians.
Over 430 zirconia variants for all technical indications! Two aesthetic lines for all aesthetic requirements! High-performance ceramics from Europe’s largest manufacturer of dental zirconium oxide. Products include:
- Zirconium dioxide DD cubeX²® – Super High Translucent (SHT)
- Zirconium dioxide DD cube ONE® – High Translucent Plus (HT+) with increased fracture toughness
- DD Bio ZX² color – High Translucent (HT)
- Zirconium dioxide DD cube ONE® ML – High Transluzent Plus (HT+)
Strength: 1150 ± 150MPa
Indications
Anatomically reduced crown, Fully anatomical (monolithic) crown posterior tooth, Primary telescope, Anatomically reduced bridge (up to 3 links), Anatomically reduced bridge (up to 14 links), Fully anatomical (monolithic) bridge (up to 3 units), Fully anatomical (monolithic) bridge (up to 14 units), Hybrid abutment and web
Strength: 1200 ± 150MPa
Indications
Anatomically reduced crown, Fully anatomical (monolithic) crown posterior tooth, Primary telescope, Anatomically reduced bridge (up to 3 links), Anatomically reduced bridge (up to 14 links), Fully anatomical (monolithic) bridge (up to 3 units), Fully anatomical (monolithic) bridge (up to 14 units), Hybrid abutment and web
Strength: 1050 ± 150 MPa cervical
Indications
Anatomically reduced crown, Fully anatomical (monolithic) crown posterior tooth, Primary telescope, Anatomically reduced bridge (up to 3 links), Anatomically reduced bridge (up to 14 links), Fully anatomical (monolithic) bridge (up to 3 units), Fully anatomical (monolithic) bridge (up to 14 units), Hybrid abutment and web
Strength: 700-1050MPa
Indications
Anatomically reduced crown, Fully anatomical (monolithic) crown posterior tooth, Primary telescope, Anatomically reduced bridge (up to 3 links), Anatomically reduced bridge (up to 14 links), Fully anatomical (monolithic) bridge (up to 3 units), Fully anatomical (monolithic) bridge (up to 14 units), Hybrid abutment and web
Suprême Lithium disilicate glass-ceramic is ideally suited for the fabrication of anterior and posterior monolithic restorations or veneered restorations. Excellent aesthetics are achieved due to its natural-looking tooth coloring and excellent optical properties, while it’s outstanding performance is based on a combination of excellent flexural strength and high fracture toughness, allowing the clinician to work in accordance with the requirements of conservative dentistry. The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology.
This material can be utilized for high-efficiency aesthetic restorations such as: veneers, inlays, onlays, partial crowns, anterior crowns, posterior crowns, etc.
Suprême glass-ceramic products are used in conjunction with either press or CAD/CAM technology and are part of an open system, allowing you to choose any combination of our products to create a digital dental solution to meet your budget and fulfill your needs.
This form of ceramic block is utilized in a CAD/CAM system in a crystalline state (with a lilac color appearance), which is manufactured on a CNC milling machine utilizing a grinding technique.
After milling is completed, a porcelain furnace is used to crystallize the material at a temperature of 840–850 °C, yielding a restoration with a biaxial flexural strength between 400 MPa ± 60 MPa.
Suprême UP-CAD blocks have been divided into two categories according to their respective translucency characteristics:
Suprême.press is a form of lithium disilicate glass-ceramic block that is suited for the pressing technique. Suprême.press ingots are available in two translucency levels.
Suprême.press HT
Suprême.press HT ingots are supplied in 6 A-C Vita and 2 bleach shades. Due to their high translucency—similar to that of natural enamel—these ingots are suitable for producing small restorations (e.g., inlays). The restorations are customized utilizing the staining technique.
Suprême.press LT
Suprême.press LT ingots are supplied in 7 A-C Vita and 2 bleach shades. Their low translucency, similar to that of natural dentin, renders these ingots suitable for creating large restorations (e.g., posterior crowns). The aesthetic appearance of the restorations is maximized by the cut-back technique.
POLIDENT PMMA CAD-CAM DISCS are suitable for the fabrication of temporary crowns and bridges and for verifying the restoration on the plaster model/in mouth before the final milling process.
PMMA-polymethyl methacrylate is primarily designed for the production of long- or short-term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
These high-quality PMMA discs are biocompatible for patients with allergies and have the highest density possible because there are no inorganic fillers or fiber.
Axsys offers PMMA CAD/CAM discs from Polident for use in milling:
- Temporary crowns and bridges.
- On-model verification of restorations.
- Digitally designed highly esthetic and functional dentures.
- Castable frameworks for metal casting and castable layers for press ceramic.
- Stents for implant planning made from X-ray visible material.
- High-quality dental models.
- More...
Suitable for the fabrication of temporary crowns & bridges and for verifying restorations on models.
VITA® shades A1, A2, A3, B1, B2, B3, BL1, BL2 BL3, Clear, enamel colors E1, E2
Benefits: strength & stability, high luster polishability, excellent machinability, absolute biocompatibility & stainability.
Ideal for obtaining a perfect color effect of temporary crowns and bridges in a single step.
Benefits: Strength and Stability, High Luster Polishability, Excellent Machinability, Absolute Biocompatibility.
Available in heights of 15mm, 18mm,
20, & 25mm.
Primarily designed for the production of long- or short-term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
Benefits: Strength and stability, high Luster polishability, excellent machinability, absolute bio-compatibility and stainability
Available in two densities A higher density (beige) is easily machineable.
and has an extremely high-quality surface finish.
A lower density (brown) is recommended for bigger models and antagonist models.
The material’s closed cell structure doesn’t absorb water and is recommended for ceramic layering.
Discs Can be used for immediate load implant denture as a long-term provisional in combination with denture teeth and titanium connectors.
Artificial teeth are attached to denture bases with PMMA resin or light-curing composite material with proper primer.
Available in thicknesses of 25
27 and 30mm.
Contains X- ray visible powder.
Homogeneous mix ensures best visibility.
Prevents light scattering.
Indications: allows visibility of teeth setup in the x-ray CAT scan for implant planning and determination.
Indications: milling frameworks for casting
Milling castable layers for press ceramic
Verifying frameworks on plaster model/in mouth before final ZrO2 milling.
Shades: transparent in thickness range of: 10 – 25 mm.
Used for immediate load implant dentures as long-term provisionals in combination with denture teeth and titanium connectors.
Teeth can be milled directly or used in conjunction with artificial teeth which are attached on denture base with PMMA resin or light-curing composite material with proper primer
For the Most Demanding Customer
Since 1958, Polident have been offering top quality dental products to help you offer your clients the best possible treatment and aesthetic solutions. For their 55th anniversary, we present the new line of anatomical teeth REF-LINE for the most demanding users. PMMA-polymethyl methacrylate is primarily designed for the production of long- or short-term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.
These high-quality PMMA discs are biocompatible for patients with allergies and have the highest density possible because there are no inorganic fillers or fiber.
Axsys offers PMMA artificial teeth from Polident, of which there are product lines with a wide variety
of teeth in each product segment. Poilident tooth products are:
- REF-LINE
Multi-layered nano-filled polymethylmethacrylate REF-LINE anatomically shaped artificial teeth with excellent abrasion resistance.
- PRIMODENT
Three-layered polymethylmethacrylate PRIMODENT teeth are artificial teeth that come in a wide range of forms, sizes, and shades and are suitable for the production of top-quality partial and total dentures.
- CROSS-LINKED 2
The two-layered CROSS-LINKED 2 teeth are highly cross-linked polymethylmethacrylate teeth for the production of partial and total dentures.
The following optional accessories are available:
- Individual presentation suitcases for REF-LINE, PRIMODENT and CROSS LINKED 2 products of one shade.
- Shade guides in all REF-LINE, PRIMODENT and CROSS LINKED 2 shades.
- Small and large drawers for easy storage of POLIDENT artificial teeth.
High-end multi-layer tooth line for new generation prostheses.
Ref-line teeth are made from a new composite acrylic material. The material is composed
of pre-cross-linked polymer and the matrix reinforced by inorganic nano- and micro-fillers.
Compared to conventional acrylic, the new Ref-line material offers improved resistance to the mechanical wear, good resistance to plaque adhesion, color stability, higher hardness, excellent polishing properties and good adhesion to denture base materials.
Natural Color and Shape:
- Natural morphology of tooth surface.
- Incisal cracks and minor irregularities.
- Transparent incisal area.
- Visible mamelons in the dentin area.
- Intensive chromaticity of the gingival region.
- Including gingivally extended tooth designs for covering metal.
- Structures in implants and partial prostheses.
- Obscured fissural zones on the occlusal surface.
Anatomically designed pronounced cusps assure the maintaining of the natural tooth appearance and structure in individual matching with the antagonists anatomically designed pronounced cusps assure the maintaining of the natural tooth appearance and structure in individual matching with the antagonists.Brand new production technology has provided perfection of tooth design. For example the retention opening on the lower part of the trans canine teeth provides for easier and faster work.
New material advancements provide a 50% improvement in tooth wear and 15% improved hardness without affecting elasticity.
look and Feel Natural 
PRIMODENT
Three-layered polymethylmethacrylate PRIMODENT teeth are artificial teeth that come in a wide range of forms, sizes and shades, and are suitable for the production of top-quality partial and total dentures.
To produce PRIMODENT teeth Polident uses top-quality materials and appropriate technological processes that assure the color and heat stability of the teeth, strong resistance to abrasion and solvents and durable adhesion with denture base material.
To assure constant quality and the proper shade, PRIMODENT teeth undergo three different visual inspections as well as other standard tests and analyses
- 27 forms of upper anterior teeth that are subdivided into 3 subgroups (oval, square, triangular).
- 10 forms of lower anterior teeth.
- 8 sets of posterior teeth.
PRIMODENT teeth are available in 16 shades, harmonized with the VITAPAN® CLASSIC shade guide and 19 shades harmonized with the CHROMASCOP® shade guide.
You can order PRIMODENT teeth either as a complete set of 28 teeth for total denture or as a separate set of 6 or 8 teeth (A6 upper anterior, A6 lower anterior, A8 lower posterior, A8 upper posterior). To identify the optimal aesthetic and functional solution for your customer we have prepared a list of suggested combinations of different anterior and posterior sets. You can find it in our PRIMODENT leaflet.
For a Beautiful Smile The two-layered CROSS LINKED 2 teeth are highly cross linked polymethylmethacrylate teeth. The top-quality base material and suitable technological processes assure the color and heat stability of the teeth, strong resistance to abrasion and solvents and durable adhesion with denture base material.
CROSS LINKED 2 teeth are successfully integrated into partial and total dentures as they replace the patient’s teeth in terms of appropriate aesthetics and functionality.
- 18 forms of upper anterior teeth that are subdivided into 3 subgroups (oval, square, triangular).
- 7 forms of lower anterior teeth.
- 6 sets of posterior teeth.
CROSS LINKED 2 teeth are available in 12 shades, harmonized with the VITAPAN® CLASSIC shade guide.
You can order CROSS LINKED 2 teeth either as a complete set of 28 teeth for total denture or as a separate set of 6 or 8 teeth (A6 upper anterior, A6 lower anterior, A8 lower posterior, A8 upper posterior). To identify the optimal aesthetic and functional solution for your customer we have prepared a list of suggested combinations of different anterior and posterior sets. You can find it in our CROSS LINKED 2 leaflet.
For a Beautiful Smile